Set Up Your Motorcycle Suspension in 6 Easy Steps View Larger Image Set Up Your Motorcycle Suspension in 6 Easy Steps Premium Video Trailer. To watch the full video please upgrade and Go Premium. Your motorcycle has adjustable suspension for a reason. In 6 easy steps you can have your suspension working perfectly and giving you the best ride of your life. Dave Moss2020-06-08T12:31:51-07:00 Share This Story, Choose Your Platform! FacebookTwitterRedditLinkedInPinterestVk Related Posts 2 Clicks Out: Triumph Daytona Moto2 765 Suspension Setup June 14th, 2021 | 0 Comments Contact Patch: Hypersport Tire Test, 1st Tire Reading Ep 4 June 11th, 2021 | 3 Comments Adjusting Your Motorcycle Clutch Lever Free Play June 9th, 2021 | 0 Comments 2 Clicks Out: KLX300SM Ergonomics & Suspension Setup June 7th, 2021 | 2 Comments Review: 2021 Aprilia RSV4 Factory first ride & suspension evaluation June 3rd, 2021 | 0 Comments 3 Comments John Williamson November 6, 2020 at 9:33 amLog in to Reply Trying to confirm the measurements I should be looking to get to for both static and rider sag, front and rear. For the rear the video mentions 10-15mm static is ideal with a minimum of 8mm and to try to get between 30 and 40mm rider sag. For the front it’s not so clear from the video of what the static and rider sag measurements should be for rider weight? My bike is a 2020 Street Triple RS thunderace November 29, 2020 at 12:53 pmLog in to Reply I’m confused here. In the table Dave shows the desired sag is 30-40 mm static and rider sag together. But all videos from the track he measures only rider sag and talks about 30-40 mm. So which is the correct measurement please? Jan Stan-Versys1k February 4, 2021 at 3:31 pmLog in to Reply What he means is your rider sag should be around 30-40mm and that includes an ideal static sag of 10-15mm. for example: If your rider sag measurements are within the ideal range but you have no static sag, then the spring rate is wrong for your weight. (spring too soft) Leave A Comment Cancel replyYou must be logged in to post a comment.